• Load a model in Cura and select it
• Click on the "Tab Anti Warping" button on the left toolbar
• Change de value for the tab Size in numeric input field in the tool panel if necessary

• Click anywhere on the model to place tab cylinder there

• Clicking existing tab cylinder deletes it

• The height of the tab is automaticaly set to the Initial Layer Height

Note: it's easier to add/remove tabs when you are in "Solid View" mode

• Clicking existing tab cylinder + Ctrl switch automaticaly to the Translate Tool to modify the position of the element.

X/Y Distance

You can specify a value for the Support X/Y distance in the input field X/Y distance. This modification will also update the Support setting Support X/Y distance. In this case a message will de displayed to inform the user of this modification :

To get the right result you should activate the option Enable Support Brim in the Support settings section :

Number of layer

The option "Number of layer" can be used to create tabs with several layer height.

If the number of layer is bigger than 1, then the Support Density is automaticaly set to 100%.

Define as Capsule

The option "Define as Capsule" can be set to create a Capsule style tab.

This new design has been integrated following the request of Reality4DEvolution in this post :https://github.com/5axes/TabAntiWarping/issues/7

The new design should offer a bevel on the outsite of the tab to be much more easy to remove, as you can get the scraper under it, and start to remove the project much easier.

Youtube Video