Layer Adhesion - 5axes/Calibration-Shapes GitHub Wiki
Test piece to test adhesion between layers. Once you've determined the right temperature and flow rate for a filament, you can print the part. Once printed, try detaching manually the tail from the base.
SCAD Model Layer Adhesion Test part
Printing Conditions
- Nozzle Size : 0.4
- Layer Height : 0.2
- Initial Layer Height : 0.2
- Line Width : 0.4
- Wall Line Count : 3
- Infill Density : 8%
- Top/Bottom Thickness : 0.8 mm
Printing Time = 15 mn