Antenna Genius TCPIP network - 4o3a/genius-api-docs GitHub Wiki
Get device network configuration
C<seq_number>|network get
Example:
C34|network get
See Response Format for details on the format of the response messages from the radio
Response Example:
R34|0|network dhcp=1 address=192.168.1.39 netmask=255.255.255.0 gateway=192.168.1.1 auth=213456
| Parameter | Value |
|---|---|
| dhcp | DHCP enabled (0 or 1) |
| address | Primary IP address |
| netmask | Network mask |
| gateway | Default gateway |
| auth | WAN auth password |
Configure device network parameters
C<seq_number>|network set [dhcp=0|1] [address=<address>] [netmask=<netmask>] [gateway=<gateway>] [auth=<auth>]
<dhcp> = DHCP 1=enable or 0=disable
<address> = Primary IP address
<netmask> = Netmask
<gateway> = Default gateway
<auth> = Remote access password
Example:
C22|network dhcp=1 address=192.168.1.39 netmask=255.255.255.0 gateway=192.168.1.1 auth=123456
See Response Format for details on the format of the response messages from the radio
Response Example:
R22|0|
When DHCP changes, the device will reboot automatically. Additionally, if DHCP is disabled and any of the addresses are changed, the device will reboot automatically.
