Antenna Genius TCPIP flex - 4o3a/genius-api-docs GitHub Wiki
This command is used to list the available FlexRadio devices connected to a LAN.
C<seq_number>|flex list
Example:
C77|flex list
The command will return the list of discovered radios in multiple responses with the same <seq_number>, containing a message with radio information prior to returning the OK status.
See Response Format for details on the format of the response messages from the device
Response Example:
R77|0|flex model=FLEX-6700 serial=1514-3143-6700-7544 nickname=Ranko callsign=4O3A
R77|0|
| Parameter | Value |
|---|---|
| model | FlexRadio model |
| serial | Serial number - used to bind to the AG device |
| nickname | Radio nickname |
| callsign | Configured callsign |
Gets the per-port (A and B) integration configuration parameters
C<seq_number>|flex get <port_id>
<port_id> = Port identifier / 1=A, 2=B
Example:
C12|flex get 1
See Response Format for details on the format of the response messages from the device
Response Example:
R12|0|flex 1 serial= ant=ANT2 ptt=LAN
| Parameter | Value |
|---|---|
| id | Port identifier |
| serial | Configured serial number |
| ant | Port connected to antenna port |
| ptt | PTT source - LAN or RCA |
Configuring AG-FlexRadio port integration
C<seq_number>|flex set <port_id> serial=<serial_no> ant=<antenna_port> ptt=<ptt_source>
<port_id> = Port identifier
<serial_no> = Radio serial number for binding
<antenna_port> = AG port is connected to: ANT1, ANT2, XVRT
<ptt_source> = PTT source: LAN or RCA
Example:
C8|flex set 1 serial=1514-3143-6700-7544 ant=ANT1 ptt=LAN
See Response Format for details on the format of the response messages from the device
Response Example:
R8|0|
