Antenna Genius TCPIP conf - 4o3a/genius-api-docs GitHub Wiki

This command is used to get the configuration properties of the device

C<seq_number>|conf get

Example:

C64|conf get

Response Example:

C64|0|conf name=Antenna_Genius inband_port=0

<name>         = user-defined network name
<inband_port>  = inband port number (0=not configured, 1=A, 2=B)

This command is used to set the configuration properties of the device

C<seq_number>|conf set [name=<name>] [inband_port=<port_number>]

<name>         = user-defined network name
<port_number>  = inband port number (0=not configured, 1=A, 2=B)

Example:

C7|conf set name=Ranko_4O3A inband_port=2

See Response Format for details on the format of the response messages from the device

Response Example:

R7|0|

This command is used to initialize device configuration to a factory default.

Note: This command will reboot the device automatically after the command is executed.

C<seq_number>|conf init

Example:

C64|conf init

Response Example:

C64|0|

Approximately 1 second after the command is executed, the device will reboot and initialize the configuration to a factory default.