microRusEFI DIY TLDR
rusefillc edited this page Mar 6, 2023
·
5 revisions
Bare minimum microRusEFI instructions:
Fabricate "pre-populated" 80% ready microRusEFI at https://jlcpcb.com/
You would need three files to do that - gerbers archive, BOM and placement files."
Check for latest version in repository.
https://github.com/rusefi/hw_microRusEfi
https://github.com/rusefi/hw_microRusEfi/tree/master/gerbers
Order the following 8 parts:
Qty | PartNumber | Comment |
---|---|---|
1 | TLE88882QKXUMA1 | Power Management Chip |
1 | 614105150721 | Vertical microUSB |
2 | PTS636 SM43 SMTR LFS | push button |
4 | CA064X103K2RACAUTO | capacitor array |
Once you solder 8 parts to your 80% ready microRusEFI upload firmware into micro-controller
https://rusefi.com/build_server/rusefi_bundle_mre_f4.zip
More info like connector & case see https://github.com/rusefi/hw_microRusEfi
For quicker results fully assembled units are available at https://shop.rusefi.com/
- How to search the Wiki
- Quick Start
- How to ask questions
- Support
- How to create a TunerStudio project
- HOWTOs and FAQs
- rusEFI Online
- Fueling
- Multispark
- Cranking
- Electronic Throttle
- Knock Sensing
- Variable Valve Timing
- Lua Scripting
- GDI
- rusEFI virtual simulator
- Digital Dash