Skip to content

GL300 Interface board

mefistotelis edited this page Jun 5, 2021 · 24 revisions

Table of Contents

Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics

Function

The interface board only contains USB connectors (and optionally HDMI with transcoder). There is an exception within GL300a, where interface board contains video transcoder even though there is no HDMI out. Having interface on a separate board allows easy replacement in case of the connectors wear out, but also provides easy means of enhancing the radio transmitter with optional HDMI board.

Variants

There are multiple versions of the board.

Marking Overview
WM323_INTERFACE_V2 Version used in GL300a; contains video decoder, but no HDMI out.
P00928.03 Update of WM323_INTERFACE_V2.
P01213.01 Version used in GL300b; no video decoder; has USB connectors only.
P01213.02 Slight update.
WM610_GRCP_INTERFACE_V2 WM610_GRCP_CORE_V1 USB and HDMI connectors plus CAN out version.
WM610_GRCP_INTERFACE_V3 WM610_GRCP_CORE_V3 USB and HDMI connectors plus CAN out, minor update.
WM610_GRCP_INTERFACE_V3 WM610_GRCP_MFI368_V1 USB and HDMI connectors plus CAN out.
P01389.02 USB and HDMI connectors plus SDI out version.

Parts

Versions WM323_INTERFACE_V* and P00928.* components

Marking Amt. Pkg. Function Specification
DM368ZCED 5IC5GKW 1 TMS320DM368 DaVinci Digital Media Processor
ISSI 1513 IS43DR16640B-250BLI K063 8KR254000V1 1 DRAM Chip DDR2 SDRAM 1Gbit 64Mx16
4XE17 NW361 5ZP5 1 MT29F1G08ABAEAH4:E Micron NAND Flash description
GL650G KJE0637 4832111 1 Genesys Logic USB 2.0 STT Hub Controller description
24.000 33 BY LI 1 crystal oscillator, 24 MHz
T120 MaNO 1 crystal oscillator, 12 MHz
B44 1 SMD diode
5R1 1 SMD resistor, 50 Ohm
C 5A AK 1 8-lead Atmel ATSHA204 CryptoAuthentication?
FFC CON 32 pin 1 Omron XF2M-3215-1A Flat Flex Cable ZIF Connector; 32 pin, 0.5mm spacing.

Version P01213.* components

Marking Amt. Pkg. Function Specification
TODO

Programming

Only the versions P00928.* and WM610_GRCP_CORE_V* are programmable.

Chips Firmware Description
DM368, IS43DR, MT29F1G m1300 Video transcoding between Lightbridge compression and the compression for mobile app.
DM368, IS43DR, MT29F1G m1301 Video transcoding between Lightbridge compression and the compression for mobile app; may be for different board.

External interfaces

Connectors on the board are:

Marking Overview
USB type A rear out Allows connection to mobile device.
micro-USB rear out Allows connection to a PC.
4-pin FFC con. near USB-A Flex flat cable connector to the GL300 Main Board
4-pin FFC con. near u-USB Flex flat cable connector to the GL300 Main Board
32-pin FFC con. Flex flat cable connector to the GL300 Main Board
2x11-pin interboard con. HDMI board only; for connecting CORE board with HDMI transcoder and socket to the INTERFACE board.
4-pin rear output HDMI board only; according to DJI, this is reserved and unused.

Service interfaces

Versions WM323_INTERFACE_V* and P00928.* service pads

The following service pads exist on this board:

Marking Overview
TODO

Version P01213.* service pads

The following service pads exist on this board:

Marking Overview
1765_P1
1765_P4

Version WM610_GRCP_CORE_V* service pads

The following service pads exist on this board:

Marking Overview
TODO

Board view

Top of the WM323_INTERFACE_V2 board:

GL300 Connectors w/decoder board v2 top

Bottom of the WM323_INTERFACE_V2 board:

GL300 Connectors w/decoder board v2 bottom

Top of the P00928.03 board:

GL300 Connectors w/decoder board v3 top

Bottom of the P00928.03 board:

GL300 Connectors w/decoder board v3 bottom

Top of the P01213.01 board:

GL300 Connectors usb board v1 top

Bottom of the P01213.01 board:

GL300 Connectors usb board v1 bottom

Top of the P01213.02 board:

GL300 Connectors usb board v2 top

Bottom of the P01213.02 board:

GL300 Connectors usb board v2 bottom

Top of the WM610_GRCP_INTERFACE_V2 board:

GL300 Connectors HDMI board v2 top

Bottom of the WM610_GRCP_INTERFACE_V2 board (note that HDMI connector is separated on WM610_GRCP_CORE_V1):

GL300 Connectors HDMI board v2 bottom

Top of the WM610_GRCP_CORE_V1 board:

GL300 Connectors HDMI core board v1 top

Bottom of the WM610_GRCP_CORE_V1 board:

GL300 Connectors HDMI core board v1 bottom

Top of the WM610_GRCP_INTERFACE_V3 board:

GL300 Connectors HDMI board v3 top

Top of the WM610_GRCP_CORE_V3 board:

GL300 Connectors HDMI core board v3 top

Bottom of the WM610_GRCP_CORE_V3 board:

GL300 Connectors HDMI core board v3 bottom

Top of the WM610_GRCP_MFI368_V1 board:

GL300 Connectors HDMI mfi368 board v1 top

Bottom of the WM610_GRCP_MFI368_V1 board:

GL300 Connectors HDMI mfi368 board v1 bottom

Top of the P01389.02 board:

GL300 Connectors HDMI with SDI board v2 A top

Bottom of the P01389.02 board:

GL300 Connectors HDMI with SDI board v2 A bottom

Top of the P01389.02 board:

GL300 Connectors HDMI with SDI board v2 B top

Bottom of the P01389.02 board:

GL300 Connectors HDMI with SDI board v2 B bottom

Schematics

No schematics available.

Clone this wiki locally