CentraLite 3326 Motion Sensors

[DrJeff]

Having some trouble adding 3326-L Motion Sensors (Iris Motion Gen2) and 3320-L Door Sensors (Iris Gen2). Is the only way to get these working still to follow this guide #623 (comment) and compile myself? After compiling and adding can I revert to using the Docker version? Or do i have to continue to use the compiled version running on Ubuntu?

[dale3h]

I am having similar issues as well. Have you found a solution to this yet?

[nphil]

I would like to know this too, I tried adding these via Phoscon, but they would not pair. I'm on 2.05.69.

I'm using the Lowes branded version of these sensors. Any information I can share to get these working with deconz? It's the final piece of the puzzle for me!

[dmike3]

Love to know if this gets fixed. I bought the dongle, but just cancelled my order until I hear more.

[nphil]

Attached screenshot with information

[dbmet]

Just curious if there has been any movement on getting these working?

[arraylabs]

Curious as well. I have a pile of these.

[Hackshaq]

I am having a similar issue. I have been able to pair these and have them show up in the Wired view but not the web app. How do I fully add them to the mesh?

[rmotapar]

Any updates on this issue? I am a newbie trying to move from hubitat to hassio/Deconz setup for my ZigBee devices. I have a bunch of Centralite 3326 motion sensors. Wish I knew about this issue before I started the project.

[manup]

Interesting, the manufacturer code seems to be different.
Here is mine (working):

Can you please also provide a screenshot of the basic cluster after reading the attributes. I'll add the sensor to the list then.

[rmotapar]

Interesting, the manufacturer code seems to be different.
Here is mine (working):

Can you please also provide a screenshot of the basic cluster after reading the attributes. I'll add the sensor to the list then.

Thank you for the quick response. Assuming you were asking me, I am not yet sure how to get you the screenshots you asked for but I should be able to setup whatever is necessary. My setup until now involved adding the deconz add-on to hassio which has access to conbee ii. I was almost about to return the Conbee ii but this gives me hope. I will paste the screenshots soon. Thanks again @manup

[manup]

Thanks, want I'd like to check is the basic cluster "Model Id" attribute of the sensor version with the manufacturer code 0xc2df from above.

[dbmet]

Thanks, want I'd like to check is the basic cluster "Model Id" attribute of the sensor version with the manufacturer code 0xc2df from above.

Let see If this works.

[rmotapar]

@manup I have two different kinds of lowes motion sensors. One is 3326-L and another is iL07_1 which measures himidity as well (this was the latest lowes version). I tried to add two 3326-L and one iL07_1 units and all three don't appear in the deconz UI. Attached some screenshots. Please let me know if you need anything else.

[manup]

Thanks I'll check the respective code sections if there is something missing for these.

[soydeboca]

I'm also trying to pair these gen2 contact sensors from Lowe's that I was using flawlessly in Smartthings, but it appears that the pairing process does not complete (the green dot is blinking permanently).

[rmotapar]

@manup @SwoopX Would you please consider adding support for these sensors in the next release if at all possible?

[SwoopX]

@manup are you already into this? Otherwise, I'd put it on my list ;)

EDIT: Just took a closer look. Awkward that the ProfileID is not HA as it should be. That's maybe more bending than I initially thought...

[SwoopX]

Can any of you guys please post a screenshot of the power configuration cluster with the attributes being read?

[rmotapar]

@SwoopX Thank you for looking into this. Is this what you were asking?

[SwoopX]

Jep, thanks, Wanted to be sure about the battery voltage.

[soydeboca]

Mine looks like this

Thanks SwoopX!

[Hackshaq]

@manup <https://github.com/manup> @SwoopX <https://github.com/SwoopX> While we are talking about these Centralite sensors, can you guys work to officially support as many of their devices as possible? Now that the Lowes/Iris platform is dead, ebay is flooded with Centralite stuff, and it is cheap. Iris had a bunch of useful stuff I would love to add to my Deconz zigbee, such as the 3460 Smart Button. In the US at least, the Deconz platform would be a lot more useful if you had more complete support for this Centralite stuff, just based on the amount of devices available. I dont want to go get a bunch of these, only to find out they are not working with Deconz at the moment. Thanks. David

…

On Tue, Mar 3, 2020 at 5:03 PM ole ***@***.***> wrote: Mine looks like this [image: 2020 03 03_19 59 12 - HA__deCONZ_RPI4_(Home_Assistant_-deCONZ)-_VNC_V] <https://user-images.githubusercontent.com/27639753/75828014-acd89800-5d89-11ea-8648-212b4a82c3d3.png> Thanks SwoopX! — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#1731?email_source=notifications&email_token=ABZTBCPB4JMWBDKCCW3BOZ3RFWEFDA5CNFSM4IJHZ222YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOENVQOAA#issuecomment-594216704>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABZTBCNELQSZ2XO4QRTK76DRFWEFDANCNFSM4IJHZ22Q> .

[SwoopX]

Well, that's easier said than done. Each and every device may have it's quirks which need to be known and sorted out. With a detailed technical documentation, that would be far easier, as it usually provides the necessary details.

A good example for that is cluster FC0F from the screenshot above. We don't know nothing about it unless we do some reverse engineering and/or sniff the traffic. In that sense, it's also unclear it it provides some "vital" or necessary data/functionality.

That leaves us with the option of requesting device support individually, I guess.

[DrJeff]

@SwoopX What else do ya need more power attributes?

[soydeboca]

Sorry if I missunderstood, it's supposed to be working for both sensors mentioned on the first post (3326 and 3320)?

I'm using deconz v2.05.75 as an Home Assistant add-on and cannot add my Iris contact door sensors that DrJeff also mentioned on the first post (CentraLite 3320-L). This issue is only about the CentraLite 3326 and I have to open a new one? Thanks

[SwoopX]

Please open a new request for that. It has not been integrated yet.

[Mimiix]

It seems this issue is inactive / resolved. If it is not, please re-open or create another issue!

[dmike3]

Any update on this? Is it working?

[dbmet]

Any update on this? Is it working?

Yes they work. I have a couple added to my system