Installation Directions - adamheinmiller/ST_MyQ GitHub Wiki

Installation:

Create the Device Type:

  1. Create a new device type, the name can be anything
  2. Paste this code into the new device and save
  3. Publish the device type, "For Me"

Add a new Device:

  1. Create a new device, name it something appropriate
  2. Give it a unique Device Network ID
  3. Select "MyQ Garage Door" as the Type (should be at the bottom)
  4. Make sure "Published" is selected as the Version
  5. Select the Location, Hub, etc.
  6. Click Create

Setup your Garage Door:

  1. Get your Username, Password and Door Name used in the MyQ mobile app
  2. Edit your new device's Preferences and enter the information above

If everything worked correctly, the door should retrieve the current status. If you see "Unknown" there is probably an issue with your username and password; use the logs to capture error information. If you see "Door not Found" your garage door name is not correct.