NetworkManager Command-Line Tool (nmcli)

• To connect to a (wifi) network:

sudo nmcli dev wifi connect <network-ssid> password "<network-password>"

will be preconfigured if it was configured when you flash the RPiOS to the SD card using RPi Imager.

• To set static IP address:

sudo nmcli con mod <network ssid> ipv4.addresses <desired ip address, eg, 192.168.0.111/24>
sudo nmcli con mod <network ssid> ipv4.gateway <gateway/router address, e.g. 192.168.0.1>
sudo nmcli con mod <network ssid> ipv4.dns “8.8.8.8”
sudo nmcli con mod <network ssid> ipv4.method manual