Many key combinations can be looked up in the FS22 key assignments and/or freely assigned.

Show/hide mouse pointer: middle mouse button

if activated in the personal settings:

• set upper target point: LMB on an AD target point
• set lower target point: RMB on an AD target point

• assign parking lot (in edit mode): LCTRL + RMB on P in the HUD
• delete parking lot (in edit mode): LALT + RMB on P in the HUD
• send to parking lot: LMB on P in the HUD

in edit mode (while driving)

• record green line: LMB on REC
• record light blue line (backward): LMB on REC, then drive backward
• record blue line: RMB on REC
• record orange line: LShift + LMB on REC
• record brown line: LShift + RMB on REC
• NOTE: as soon as you reverse during recording, a reverse line (light blue) will be recorded!

in edit mode

• show/hide waypoints: press RCTRL
• create one waypoint: LCTRL + LMB
• create oneway line: hold down LCTRL and press then LMB to create the waypoints
• create twoway line: hold down LCTRL + LALT and press then LMB to create the waypoints
• create oneway secondary< route line: hold down LCTRL + LShift and press then LMB to create the waypoints
• connect green line: LMB on 1st waypoint, LMB on 2nd waypoint
• connect blue line: LMB on 2nd waypoint, LMB on 1st waypoint
• connect orange line: LMB on 1st waypoint, LShift + LMB on 2nd waypoint
• connect brown line: LMB on 2nd waypoint, LShift + LMB on 1st waypoint
• connect light blue line (backward): LMB on 1st waypoint, RShift + LMB on 2nd waypoint
• change waypoint priority: LShift + LMB on waypoint
• delete waypoint: LALT + LMB on waypoint
• move waypoint: grab with RMB and move it
• move waypoint on same altitude: grab with RMB, press and hold LShift, then move the waypoint
• change waypoints between 2 intersections / behind 1 intersection -> change priority: 1. LMB on crossing waypoint, 2. LShift + LMB on 1st waypoint behind the crossing
• change waypoints between 2 intersections / behind 1 intersection -> change direction: 1. LMB on crossing waypoint, 2. LCTRL + LMB on 1st waypoint behind the crossing
• delete waypoints between 2 intersections / behind 1 intersection: 1. LMB on crossing waypoint, 2. LShift + LCTRL + LALT + LMB on 1st waypoint behind the crossing
• Curve between 2 waypoints: LMB to waypoint, point mouse cursor to the other waypoint, turn mouse wheel until the desired curve is reached and then LMB to the waypoint

• LMB = left mouse button
• RMB = right mouse button
• LCTRL = left STRG key
• RCTRL = right STRG key
• LALT = left ALT key
• LShift = left Shift key
• RShift = right Shift key