3.PROBLEM DEFINATION - R-Division-2022-2023-Odd/Repo-01 GitHub Wiki
3.1 QUESTION AND ANSWER
Table 1.Questions and answer
| SI NO | QUESTIONS | ANSWERS | OBJECTIVES | COSTRAINTS | FUNCTIONS |
|---|---|---|---|---|---|
| 1 | IS IT A PORTABLE DEVICE? | YES, IT IS A PORTABLE DEVICE | YES | ||
| 2 | IS IT USER FRIENDLY? | YES, IT IS USER FRIENDLY | YES | ||
| 3 | CAN THE REELS OF THE WIRE BE EASILY REPLACED? | YES, IT CAN BE REPLACED | YES | ||
| 4 | CAN IT CUT WIRES TO MULTIPLE LENGTHS? | YES, IT CAN CUT WIRE AT A SPECIFIC LENGTH | YES | ||
| 5 | HOW MUCH WIRE CAN IT STORE PER USE ? | IT CAN HOLD A REELS OF WIRE OF LENGTH 2m | YES | ||
| 6 | HOW MANY WIRES CAN IT CUT IN 1 MINUTE? | IT CAN CUT ATLEAST 20 WIRES IN A MINUTE | YES | ||
| 7 | WHAT SHOULD BE THE BUDGET? | IT MUST BE UNDER 5000/- | YES | ||
| 8 | WHAT SHOULD BE THE WEIGHT OF THE MACHINE | IT NEEDS TO BE UNDER 2-3kg | YES |
3.2 Identifying client's objective
Table 2.Objective identified
| SI.NO | Objectives |
|---|---|
| 1 | The model should be portable |
| 2 | The model should be user friendly |
| 3 | The reels should be easily replaceable |
Problem Definition version 1.1:Design a portable wire cutting machine that is user-friendly and allows for easy replacement of wires. The machine should have safety features.
3.3 Identifying client's constraints
Table 4.Constraints identified
| SI.NO | CONSTRAINTS |
|---|---|
| 1 | It should be able to hold a reels of 2m length |
| 2 | it can cut at least 20 wires in one minute |
| 3 | Budget of the machine is below 5000/- |
| 4 | it should weigh around 2-3kg |
Problem Definition version 1.2: Design a portable wire cutting machine that is user friendly and allows for easy replacement of wires. The machine should hold a reel of 2 meters, cut at least 20 wires per minute, weigh 2-3Kg, and cost no more than 5000/-
Table.3 Functions Identified
| SI.NO | FUNCTIONS |
|---|---|
| 1 | It should be able to cut the wire |
| 2 | It should cut the wire of specific length |
Problem definition version 1.3: Design a portable wire cutting machine that is user-friendly and allows for easy replacement of wires. The machine should hold a reel of 2 meters, cut at least 20 wires per minute, weigh 2-3Kg, and cost no more than 5000/-. It should be capable of cutting wire to specific lengths.