PCB Design - HomeKidd/ESP8266-HomeKit-Contact-Sensor-Elgato-Eve-Door-Window GitHub Wiki
Since these projects are involve some soldering I highly recommend to buy a soldering iron before starting assemble it! Personally I'm using a 10$ one from Aliexpress, but since I have to solder SMD parts for the PCBs I've ordered a Soldering station like in the picture 😄
Soldering Iron
Soldering Station 1
Soldering Station 2
Hot Air Soldering Gun
I've designed a simple PCB for ESP8266 boards.
The board dimensions are 45mm x 18mm, and compatible with ESP-12E/F and ESP-07S boards.
The PCB has an USB connection for powering the module and/or one 5V/GND input!
❗️❗️❗️Order PCBs from PCBWay and You will get 5$ DISCOUNT using this link! ❗️❗️❗️
Download PCB files from here!
ESP12F/E
SMD 0805 resistors
SMD 0805 capacitors
AMS1117-3.3
4.5x4.5 button
2.54mm header
SS14
USB connector
5.08 Screw terminal
Door Sensor NC
| Prefix | Value | Package |
|---|---|---|
| R1 | 10K Ω | SMD 0805 |
| R2 | 10K Ω | SMD 0805 |
| R3 | 10K Ω | SMD 0805 |
| C1 | 100nF | SMD 0805 |
| C2 | 10uF | SMD 0805 |
| C3 | 10uF | SMD 0805 |
| C4 | 100nF | SMD 0805 |
| D1 | SS14 | SOD-123F |
| U1 | AMS1117-3.3 | SOT223 |
| Reset | Tactile Button | 4.5x4.5x6mm 90 degree |
| Serial | 2.54mm 4P header | (optional) |
| Input | 2 pin screw terminal | 5.08mm |
| USB | USB female connector | microUSB-5P-5.9-M |
❗️❗️❗️Order PCBs from PCBWay and You will get 5$ DISCOUNT using this link! ❗️❗️❗️
